محافظ Overcharge و Discharge باتری های لیتیومی 5 آمپر
محافظ Overcharge و Discharge باتری های لیتیومی 5 آمپر
محافظ Overcharge و Discharge باتری های لیتیومی 5 آمپر

محافظ Overcharge و Discharge باتری های لیتیومی 5 آمپر

0 نظر سفارش (0)
25,000تومان
کد محصول: 2077
موجودی در انبار
تعداد بازدید 1041 بازدید

توضیحات محصول

محافظ Overcharge و Discharge باتری های لیتیومی 5 آمپر

ماژول محافظ دشارژ و شارژ یا ماژول های BMS یا Battery Management System برای حفاظت و کنترل شارژ و دشارژ باتری های Lithium-Ion/Polymer مورد استفاده قرار میگیرند. این ماژول ها معمولا بر اساس میزان جریان دهی و تعداد سلول باتری که پشتیبانی میکنند دسته بندی میشوند.این مدل قابلیت پشتیبانی از باتری 2 سل با جریان دهی 5 آمپر می باشد .

Introduction

Main IC using original "precision" imported components. With overcharge, over-discharge, over current, short circuit protection function, for a variety of different shapes of 3.7V capacity lithium batteries. Compact size, suitable for many requirements of high integration, low-cost occasions, can meet the performance requirements of many aspects, to ensure the absolute safety of the battery group.

Specification

8.4V 2 string 7.4V Lithium Battery Stack Protection Board overcharge Over-discharge protection Maximum 5A working current 7A current-limiting
2 series 18650 battery 8.4V 7.4V 
Lithium battery protection board 
Comes with: overcharge, over-discharge, over current, short circuit protection 
18650 Lithium-ion battery stack essential!
 Model: HX-2S-02 
 Over voltage range: 4.25-4.35v±0.05v
 Size: 36*6*1.0mm 
 Over discharge voltage range: 2.3-3.0v±0.05v
 Maximum operating current: 3A 
 Operating temperature: -40°C~+50°C 
 Maximum instantaneous current: 5A 
 Storage condition:-40°C~80°C
 Quiescent current: less than 3uA 
 Effective life: more than 50000 hours 
 Resistance: less than 45m ohm
 Short circuit protection: Can protect, need to charge recovery 
 The protection board size and device description; 
 The protection board size is38*8*2.5mm
 Welding point description: 
 B+ Connect positive electrode; 
 B - connect battery cathode; 
 MB connect the battery 1 and battery 2 before the connection point; 
 P+ charge / discharge end positive electrode (charge end / discharge end sharing); 
 P- charge / discharge end negative (charge / discharge end).

نظر بدهید

توجه: HTML ترجمه نمی شود!
    بد           خوب
Size Chart